You can find more information about EFSA’s work in the area of food additives on our website

Recent analyses of food-grade TiO₂ samples have found that a significant portion of particles may be within the nanoscale. These particles (also known as nanoparticles) range in size from 1 to 100 nm, where 1 nm equals 1 billionth of a metre (the width of a typical human hair is 80,000 to 100,000 nm).

If you want to avoid titanium dioxide, Stoiber and Faber urge consumers to try and avoid processed foods as best as you can.

Lithopone factory : What should we pay attention to when purchasing?

The surge in demand for interior and exterior paints and use of plastic across various end-use industries drive the global Lithopone market. Lithopone white pigment is used in paints and coating systems that find applications in residential and industrial landscapes. Hence, as the construction & building sector flourishes, the demand for building and architectural materials such as paints and coatings will increase. This trend is conducive for the Lithopone market growth. In addition, white plastic materials are increasingly being used in consumer products. Developments in plastic forming technology is anticipated to indirectly boost plastic production, thus, increasing the demand for white pigments during the forecast period.

CAS NO. :

It doesn’t take much to imagine what they must be doing to our poor skin each day as we layer on our sunscreen, foundation, concealers, eyeshadows & lip sticks which all contain large doses of titanium dioxide.

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

From dyes to flavorings, many people are becoming increasingly aware of the ingredients in their food.

Although barium sulfate is almost completely inert, zinc sulfide degrades upon exposure to UV light, leading to darkening of the pigment. The severity of this UV reaction is dependent on a combination of two factors; how much zinc sulfide makes up the pigments formulation, and its total accumulated UV exposure. Depending on these factors Lithopone B301, Lithopone B311 powder itself may vary in shade over time, ranging from pure white all the way to grey or even black. To suppress this effect, a dopant might be used, like small amount of cobalt salts, which would be added to the formulation. This process creates cobalt-doped zinc sulfide. The cobalt salts help to stabilize zinc sulfide so it will not have as severe a reaction to UV exposure.

It is expected that the implementation of rutile titanium dioxide market manufacturers will be stable this week, the new single quotation of the production link will be firm, the supply of low-cost goods will be reduced, and the reference range of the overall market transaction will rise slightly. It is expected that the market transaction reference is 15200-16200 yuan/ton, and the weekly average price may refer to 15600 yuan/ton. In addition, considering the difference of orders received by different manufacturers, some manufacturers may still have 300-500 yuan/ton of negotiation room. On the demand side, most buyers still have inventory to use, so the current new batch transaction intention is not strong; On the supply side, some producers are expected to increase the load next week, so the industry time output may be slightly increased. On the whole, it is expected that the overall trading range will rise slightly next week, but most producers will adjust the real single negotiation range according to their own orders, and the new single stable price of mainstream producers.