e172 food additive

Le lithopone est produit par coprécipitation de sulfure de baryum et de sulfate de zinc, le plus souvent en proportions équimolaires, puis grillage de la pulpe résultante⁴.

Other experts say there is simply no conclusive evidence at this point that titanium dioxide is damaging to humans after ingesting. Kaminski in particular said the research studies cite health hazards that were found by using high doses of the product, which you would not normally see in food.

Opportunities

The additive goes into a lot of personal care products to whiten and brighten colors and to make them opaque, like toothpaste and makeup.

Sunscreens and cosmetics containing titanium dioxide are generally considered safe since they are mineral-based products. Mineral products are often recommended for acne-prone and sensitive skin. However, there have been some concerns that titanium dioxide may have a negative impact on health.

White crystalline powder. It is a mixture of zinc sulfide and barium sulfate. The more zinc sulfide it contains, the stronger the hiding power and the higher the quality. Density 4.136～4.34 g/cm3, insoluble in water. It easily decomposes when exposed to acid to produce hydrogen sulfide gas, but does not work when exposed to hydrogen sulfide and alkaline solutions. It turns into light gray after being exposed to ultraviolet rays in the sun for 6 to 7 hours, but it still returns to its original color when placed in a dark place. It is easy to oxidize in the air and will agglomerate and deteriorate when exposed to moisture.

What is an exposure route? 

When E171 isn’t combined with other ingredients and administered in water, some studies suggest that under these artificial conditions, E171 may be processed differently in the body resulting in some biological changes in experimental animals that are poorly understood.

A great number of other brands with fancy names have gone out of the German market, because of some defects in the processes of manufacture. The English exporters, as a rule, offer three or four grades of lithopone, the lowest priced consisting of about 12 per cent zinc sulphide, the best varying between 30 and 32 per cent zinc sulphide. A white pigment of this composition containing more than 32 per cent zinc sulphide does not work well in oil as a paint, although in the oilcloth and shade cloth industries an article containing as high as 45 per cent zinc sulphide has been used apparently with success. Carefully prepared lithopone, containing 30 to 32 per cent sulphide of zinc with not over 1.5 per cent zinc oxide, the balance being barium sulphate, is a white powder almost equal to the best grades of French process zinc oxide in whiteness and holds a medium position in specific gravity between white lead and zinc oxide. Its oil absorption is also fairly well in the middle between the two white pigments mentioned, lead carbonate requiring 9 per cent of oil, zinc oxide on an average 17 per cent and lithopone 13 per cent to form a stiff paste. There is one advantage in the manipulation of lithopone in oil over both white lead and zinc oxide, it is more readily mis-cible than either of these, for some purposes requiring no mill grinding at all, simply thorough mixing with the oil. However, when lithopone has not been furnaced up to the required time, it will require a much greater percentage of oil for grinding and more thinners for spreading than the normal pigment. Pigment of that character is not well adapted for use in the manufacture of paints, as it lacks in body and color resisting properties and does not work well under the brush. In those industries, where the paint can be applied with machinery, as in shade cloth making, etc., it appears to be preferred, because of these very defects. As this sort of lithopone, ground in linseed oil in paste form, is thinned for application to the cloth with benzine only, and on account of its greater tendency to thicken, requires more of this comparatively cheap thinning medium, it is preferred by most of the manufacturers of machine painted shade cloth. Another point considered by them is that it does not require as much coloring matter to tint the white paste to the required standard depth as would be the case if the lithopone were of the standard required for the making of paint or enamels. On the other hand, the lithopone preferred by the shade cloth trade would prove a failure in the manufacture of oil paints and much more so, when used as a pigment in the so-called enamel or varnish paints. Every paint manufacturer knows, or should know, that a pigment containing hygroscopic moisture does not work well with oil and driers in a paint and that with varnish especially it is very susceptible to livering on standing and to becoming puffed to such an extent as to make it unworkable under the brush. While the process of making lithopone is not very difficult or complicated, the success of obtaining a first class product depends to a great extent on the purity of the material used. Foreign substances in these are readily eliminated by careful manipulation, which, however, requires thorough knowledge and great care, as otherwise the result will be a failure, rendering a product of bad color and lack of covering power.

CARACTÉRISTIQUES

Les pouvoirs couvrant et éclaircissant du lithopone normal sont supérieurs à ceux de la céruse et de l'oxyde de zinc, mais inférieurs au Dioxyde de Titane pur, étant le meilleur blanc sous tout rapport. C'est le sulfure de zinc qui, avec son indice de réfraction de 2,37, est l’élément opaque ; le 2nd composé, le sulfate de baryum, joue un rôle de diluant minéral et favorise l'efficacité de la diffusion du premier.

Assessment of skin penetration and biohazard in vivo