e321 food additive

Latest articles



Popular articles

Latest articles

Links

  • galvanized

  • galvanized

  • 2. Zinc layer uniformity: zinc layer uniformity also has an important impact on corrosion resistance. If the zinc layer is not uniform, there are local defects or insufficient thickness areas, it is easy to form corrosion points, resulting in the destruction of the entire zinc layer.

  • Two is to pay attention to the storage and use of galvanized wire products, according to the actual environmental standards to choose different specifications of galvanized wire products;

  • With a large pickpocket used for steel wire, into the zinc liquid before the surface of the zinc ash stirring; Use a small outlet for galvanized steel wire; Zinc pot steel wire outlet in 30 minutes, with pickpockets back and forth, until the large, floating zinc residue into brown, real zinc ash, zinc ash surface. The extracted zinc ash should be brown yellow real zinc ash, zinc surface, effectively reduce zinc consumption. This is one of the biggest steps to bring zinc consumption down, and it’s a real problem, one that hasn’t been solved for years.

  • Post time: 12-04-23
  • Choose a well-structured crate, such as one with a tray under it so the dog can pee and defecate in it. It’s also easy for the host to clean up.

  • If the requirements are higher, and it is humid place, it is recommended to use hot-dip galvanized barbed rope, although the price is higher, but the service life is longer, generally speaking, it is more cost-effective.

  • Aliases: Gabion mesh, heavy hexagonal mesh, ecological mesh, wire mesh, etc.

  • galvanized

  • Because of its light weight, strength is relatively large has gradually begun to replace the original column. At the same time, due to the relatively uniform specifications, the barbed rope installation is also more beautiful. The direct spacing of the barbed rope is relatively fixed, which can effectively prevent crossing. At the same time, the mesh at the bottom is relatively dense, while the mesh at the top is relatively loose, which can save resources.

  • 5, after the light plating should be carried out light treatment.

  • Galvanized hexagonal net features: easy to use; Save transportation costs. It can be reduced to small rolls and wrapped in moisture-proof paper packaging, taking up less space. Coating thickness uniformity, stronger corrosion resistance; Simple construction, no need for special technology; It has strong ability to resist natural damage, corrosion resistance and adverse weather effects; Can withstand a large range of deformation, but still does not collapse. Fixed heat preservation and heat insulation effect.

  • Post time: 28-09-22
  • In this temperature range, the zinc solution is severely corroded to the workpiece and the zinc pot, and the iron is lost at 560 degrees Celsius to add obviously, and the zinc will be the iron substrate above 660 degrees Celsius, zinc slag will be added quickly, plating cannot be used. Therefore, electroplating is carried out in the range of 430~450 degrees Celsius.

  • Purpose of galvanized hexagonal net: building wall fixed, heat preservation, heat insulation

  • Zinc dipping time should be adjusted according to the thickness of wire diameter. The method of adjustment is to use the lead screw above the zinc pot, the length of the distance to the ceramic sinking roller. Thick wire diameter zinc dipping time should be long, fine wire diameter zinc dipping time should be short, zinc dipping length is in the range of 2~3.5m, which is also to reduce the zinc consumption of steel wire, is an aspect of maintaining the uniformity of zinc layer.

  • The error of construction welding net diameter should be controlled at 0.02 mm. For example, we buy wire diameter of 89 wire welding net, with a micrometer to measure the diameter, the diameter of the allowable range is 87 -91 wire. In this range is qualified welding net. Because the accuracy has been compared, but no one can control it so well in the production process. The welding net can be accurate to 0.01 mm, so the error is allowed.

  • barbed

  • cold

  • 1. The surface of the stainless steel pet cage is deposited with dust or alien metal particles containing other metal elements. In the humid air, the condensed water between the attachment and stainless steel will connect the two into a micro cell, which causes the electrochemical reaction and the protective film is destroyed, which is called electrochemical corrosion. To avoid this situation, as long as the stainless steel surface is clean, you can ensure that the stainless steel pet cage does not rust.

  • Guardrail in the purchase of how to install the correct is very important, and the installation of guardrail is important, the requirements of height and material are very strict.

  • hook

  • barbed

  • In white iron, its carbon and iron phase into iron carbide, crack white, extremely strong and brittle, for the malleable steel material. Alloy grades are made up of various alloying elements with different compositions and structures. Because the alloy element in the iron can make the copper material thick strengthening degree, hardness, impact force, strength resistance, collection rate, elongation rate, so the alloy iron in the exercise of high quality iron, is an additive element.

  • U nail price selection of galvanized iron wire, hot dip galvanized iron wire and black iron wire and other high-quality wire, welded, PVC or PE, PP powder after curing coated its surface, with strong adhesion, good corrosion resistance, bright color and so on.

  • welding

  • Compared with other galvanizing processes, galvanized steel wire has low cleaning requirements before plating. However, under the current trend of increasing the quality level of galvanized layer, some pollutants brought into the plating tank are obviously harmful. Because cleaning galvanized coating wastes a lot of time and reduces production, it is very important to properly clean and effectively rinse the substrate before electroplating.

  • 6. The barbed rope protective net should be laid according to the terrain of the road boundary. The flat section should be set horizontally, and the slope section should be set along the slope or by the step form.

  • Plastic