phosphoric acid 35

Latest articles



Latest articles

  • Many luxury cat, dog, parrot, bird and flock cages use iron square pipes. Luxury cages use iron square tubes that are usually used as the frame of the cage body, and then touch welded wire on each face. The characteristics of the square tube cage are more beautiful shape design, cage body more solid, surface treatment methods.

  • iron

  • Zinc pot workers should be determined to do duty and responsibility. Do not leave the post without leave, always observe the change of hot plating wire galvanized layer, and according to the analysis results, master the asbestos block gap friction, how long it takes to press, replace the pressing face; Adjust the working face; Until all four sides of the asbestos block are used up, maintenance workers will continue to use the block after repair when necessary to reduce the consumption of asbestos block.


  • Post time: 03-02-23
  • Once you find that the beginning of it has deformation, rust or broken problems must be timely correction. Generally speaking, the blade barbed rope will not be damaged simply, but it cannot be ensured that it will not happen. Because the local place where the blade barbed rope is required is generally outdoors, the probability of presenting an incident will be greatly increased. For example, in the plantation under the hillside, the blade barbed rope was damaged and deformed by stones rolling down the mountain, which requires manual correction in time, otherwise the deformed blade barbed rope will not only affect the beauty, but also lay hidden dangers for safety.

  • galvanized

  • hook

  • black

  • Characteristics: strong anti-corrosion performance, bright appearance, beautiful appearance.
  • Wire mesh production of general selection of low carbon wire, after fine and accurate active welding equipment processing, the selection of galvanized process surface treatment. After the completion of the product, the net surface is smooth and regular, good integrity, strong and consolidated, even if part of the choice or pressure will not appear lax phenomenon.

  • Galvanized iron wire has tolerance and elasticity, the amount of zinc can reach 300 g/square meter. It has the characteristics of thick galvanized layer and strong corrosion resistance. Widely used in construction, handicrafts, wire mesh, highway guardrail, commodity packaging and ordinary civilian and other fields.

  • Hot dip galvanized wire: This product uses excellent carbon structural steel, through drawing, hot dip galvanized processing. Widely used in the manufacture of wire mesh, highway barrier and construction projects. With thick coating, corrosion resistance construction binding with iron wire is 22# (0.71mm), low price, its characteristics of good flexibility, not easy to break, is one of the most ideal binding wire construction industry, the first choice of low zinc cold plating treatment of iron wire. The primary choice of low zinc cold plating treatment of wire.
  • Carbon spring steel wire is made of high carbon and high quality carbon structural steel or carbon tool steel wire rod, and its chemical composition, gas content and non-metallic inclusion must be strictly controlled according to the use of the spring. In order to reduce the surface defects and decarbonization layer, the billet produced wire rod should be ground on the surface and peeled when necessary.

  • In view of this situation, many manufacturers are committed to ensuring the corrosion resistance of titanium and titanium alloy under the premise of increasing the hardness of titanium alloy, and surface carburizing is one of the typical processing technology means. Similar to the surface carburizing treatment of steel, the surface carburizing treatment of titanium alloy is to make the active carbon atoms, diffusion to the internal of titanium alloy, the formation of a certain thickness of higher carbon content of the carburizing layer, after quenching and tempering, so that the surface layer of the workpiece to obtain high carbon content of titanium alloy wire.

  • In addition, the corrosion resistance of hot-dip galvanized wire will also be affected by other factors. For example, in different environments, especially in some special chemical environments, such as acidic or alkaline environments, the corrosion resistance of hot-dip galvanized wire may be affected to a certain extent. At this time, it may be necessary to use other materials that are more resistant to corrosion to replace the hot-dip galvanized wire.

  • Post time: 28-03-23
  • The above is to extend the service life of stainless steel barbed rope method, mainly to spray and galvanized.


  • Post time: 02-06-23
  • One: according to the color of the spray blade thorn rope, its price is higher than the ordinary blade thorn rope 2000-2200 yuan, but the price ratio of the spray blade thorn rope is much higher.


  • Post time: 13-07-22
  • Galvanized iron wire is widely used in construction, handicrafts, wire mesh, highway guardrail, product packaging and daily civilian and other fields.

  • Through drawing molding, pickling rust removal, high temperature annealing, hot dip galvanizing. Cooling and other technological process processing. Galvanized iron wire selection of high quality low carbon steel raw materials, after drawing, galvanized and other processes. With galvanized layer, strong corrosion resistance, galvanized layer strong characteristics, electric galvanized iron wire is widely used in construction, highway fence, tie, weaving and other industries.

  • 1, galvanized wire mesh molding sheet must be packed with flat hard data, to avoid eternal deformation due to poor packaging. It IS VERY IMPORTANT THAT EACH PACKAGE AND ROLL OF RAW SHEET MATERIAL BE MARKED WITH PRODUCT NAME, STANDARD, QUANTITY, TRADEMARK, batch number, MANUFACTURER, DATE of production, STACKING SYMBOL, INSPECTOR CODE AND INSPECTION CERTIFICATE.

  • Post-plating (passivation, hot melting, sealing and dehydrogenation, etc.) for the purpose of enhancing protective properties, decoration and other special purposes. After galvanized, chromate passivation or other conversion treatment is generally required to form the corresponding type of conversion film, which is one of the key processes to ensure the quality of post-plating.