Sodium Dichloroisocyanurate Safety Handling Protocols

Hebei Tenger Chemical Technology Co., Ltd., a global leader in specialty chemical manufacturing, presents this comprehensive technical manual covering all aspects of sodium dichloroisocyanurate safety, handling, and application protocols. Our high-performance dichloroisocyanurate de sodium and sodium dichloroisocyanurate nadcc products set industry benchmarks for disinfection efficacy across water treatment, healthcare, and food processing sectors.

 

 

Technical Specifications and Quality Standards of Sodium Dichloroisocyanurate

 

The technical specifications and quality standards for sodium dichloroisocyanurate (SDIC）, also known as dichloroisocyanurate de sodium or sodium dichloroisocyanurate nadcc) are meticulously defined to ensure its effectiveness and reliability across various applications, especially in disinfection and sanitation. The following table outlines the key parameters, testing methods, and their performance significance:

 

Parameter	Spezifikation	Test Method	Performance Significance
Available Chlorine	≥60%	Titration	Determines the disinfectant strength of sodium dichloroisocyanurate. A higher available chlorine content indicates a more potent ability to eliminate bacteria, viruses, and other pathogens, making it highly effective in water treatment, swimming pool sanitation, and industrial disinfection.
Moisture Content	≤1.0%	Karl Fischer	Ensures the stability of sodium dichloroisocyanurate nadcc. Excess moisture can lead to degradation of the chemical, reducing its efficacy and potentially causing safety issues. By maintaining low moisture levels, the product remains stable during storage and transportation.
pH (1% solution)	5.5 - 7.0	Potentiometric	Indicates the solution compatibility of dichloroisocyanurate de sodium. A pH within this range ensures that the chemical can be safely mixed with other substances and used in different environments without causing unwanted chemical reactions or corrosion.
Solubility (25°C)	≥25g/100ml	Gravimetric	Affects the application efficiency of sodium dichloroisocyanurate. High solubility allows for easy dissolution in water, enabling seamless integration into liquid formulations for spraying, soaking, or other disinfection methods.
Granule Size	20 - 60 mesh	Sieve Analysis	Optimizes the dissolution rate of sodium dichloroisocyanurate nadcc. The specified granule size range ensures consistent particle size, facilitating even distribution and faster dissolution, which is crucial for achieving uniform disinfection results.
Stability	12 months	Accelerated Aging	Guarantees the shelf life of dichloroisocyanurate de sodium. A stable sodium dichloroisocyanurate product maintains its disinfection performance over time, providing wholesalers and end - users with reliable inventory management and consistent product quality.

 

Hebei Tenger Chemical Technology Co., Ltd. adheres to strict quality control measures to ensure that all sodium dichloroisocyanurate products meet these rigorous specifications. Our advanced testing facilities and experienced quality control team use accurate methods like titration, Karl Fischer, and sieve analysis to verify each parameter, ensuring that our sodium dichloroisocyanurate nadcc and dichloroisocyanurate de sodium products are of the highest quality and ready to meet the diverse needs of customers in the disinfection industry.

 

Sodium Dichloroisocyanurate Industrial Applications

 

Water Treatment Solutions

Potable water disinfection

Swimming pool sanitation

Wastewater treatment

Cooling tower biocontrol

 

Healthcare Sector

Medical equipment sterilization

Surface disinfection

Epidemic outbreak control

Hepatitis virus eradication

 

Food Industry

Processing equipment sanitization

Produce washing

Brewery sanitation

Dairy facility disinfection

 

Dichloroisocyanurate De Sodium Technical Advantages

 

Our dichloroisocyanurate de sodium offers:

• High chlorine stability (≤1% monthly loss)
  • Rapid dissolution properties
  • Broad-spectrum microbial kill
  • Residual disinfectant action
  • Cost-effective dosing

Performance Characteristics:

60% minimum available chlorine

Controlled release properties

pH-neutral application

Non-foaming formula

 

Sodium Dichloroisocyanurate Nadcc Safety Protocol

 

Handling Requirements

Chemical-resistant gloves (neoprene)

NIOSH-approved N95 respirator

Protective goggles with side shields

Impermeable aprons

Dedicated measuring equipment

Storage Conditions

Temperature: <30°C (86°F)

Humidity: <65% RH

Packaging: Sealed HDPE containers

Separation: From acids and reducers

Shelf life: 12 months in original packaging

 

Sodium Dichloroisocyanurate Nadcc FAQS

 

What concentration of sodium dichloroisocyanurate is effective against hepatitis viruses?

A 0.1% solution of sodium dichloroisocyanurate nadcc (1000ppm available chlorine) achieves complete inactivation of hepatitis A&B viruses within 5 minutes contact time.

 

How does dichloroisocyanurate de sodium compare to sodium hypochlorite?

Dichloroisocyanurate de sodium offers superior chlorine stability (60% vs 12-15%), longer residual action, and better material compatibility than sodium hypochlorite solutions.

 

What PPE is required when handling sodium dichloroisocyanurate powder?

When handling sodium dichloroisocyanurate powder, wear chemical goggles, N95 respirator, neoprene gloves, and protective clothing to prevent exposure.

 

Can sodium dichloroisocyanurate nadcc be used in food contact applications?

Yes, our sodium dichloroisocyanurate nadcc meets FDA and EU standards for food contact surface disinfection when properly rinsed after application.

 

What is the proper disposal method for sodium dichloroisocyanurate solutions?

Neutralize spent sodium dichloroisocyanurate solutions to pH 6.5-7.5 before disposal, following local wastewater treatment regulations for chlorinated compounds.

Hebei Tenger Chemical Technology Co., Ltd. delivers premium sodium dichloroisocyanurate, dichloroisocyanurate de sodium, and sodium dichloroisocyanurate nadcc products that redefine disinfection standards. From our guaranteed 60% available chlorine content to optimized granule size for rapid dissolution, every specification ensures maximum efficacy against pathogens while maintaining strict safety standards. Our comprehensive technical support and bulk supply capabilities make us the preferred partner for industrial and institutional disinfection programs worldwide. Contact our technical sales team for customized disinfection solutions tailored to your specific requirements.

 

Welcome to www.tengerchemical.com! As a global leader in chemical solutions, we specialize in high-quality industrial chemicals, agrochemicals, and specialty materials. Our products—ranging from crop-protecting pesticides to water treatment agents—meet strict ISO standards for purity and safety, serving agriculture, manufacturing, and environmental sectors.

 

Explore our user-friendly site to discover reliable solutions tailored to your needs. We prioritize sustainability with eco-friendly formulations and offer flexible packaging, global shipping, and technical support. Trusted by clients in 50+ countries, we deliver transparent pricing and timely service.

 

Visit www.tengerchemical.com today to browse our range, request a quote, and experience the excellence of Tenger Chemical. Elevate your operations with our innovative, responsible chemical solutions—shop now!